3Com WBR-6000 Network Router User Manual


 
Wireless Features
Standards Compliant. The Wireless Broadband Router
complies with the IEEE802.11g (DSSS) specifications for
Wireless LANs.
Supports Pre-N Wireless Stations. The 802.11n Draft
standard provides for backward compatibility with the 802.11b
standard, so 802.11n, 802.11b and 802.11g Wireless stations
can be used simultaneously.
Speeds to 300Mbps. All speeds up to the 802.11g maximum
of 300Mbps are supported.
WEP support. Support for WEP (Wired Equivalent Privacy) is
included. Key sizes of 64 Bit and 128 Bit are supported. WEP
encrypts any data before transmission, providing protection
against snoopers.
WPA-PSK(WPA2-PSK) support. Like WEP, WPA-PSK
encrypts any data before transmission, providing protection
against snoopers. The WPA-PSK is a later standard than WEP,
and provides both easier configuration and greater security than
WEP.
Wireless MAC Access Control. The Wireless Access
Control feature can check the MAC address (hardware address)
of Wireless stations to ensure that only trusted Wireless Stations
can access your LAN.
Simple Configuration. If the default settings are unsuitable,
they can be changed quickly and easily.
WPS Support. WPS (Wi-Fi Protected Setup) allows
consumers to protect their home networks by using the push
button configuration (PBC) on the router, or entering an 8-digit
PIN code if there's no button.
LAN Features
4-Port Switching Hub. The Wireless Broadband Router
incorporates a 4-port 10/100BaseT switching hub, making it easy
to create or extend your LAN.
DHCP Server Support. Dynamic Host Configuration Protocol
provides a dynamic IP address to PCs and other devices upon
3