Filter
Top Products
15
3M™ Digital WallDisplay
© 3M 2005. All Rights Reserved.
Installation and System Setup
Installation and System Setup
Recommendation and Things to Consider Before Installing
Location of Unit
• Place near AC outlet. The AC power connection is located on the lower-left corner of the 3M Digital
WallDisplay (the unit). The AC power cord supplied with the unit is 6 feet (2 m) long.
• Service and screen replacement – The projection screen is removed from the side of the unit during replacement
or service. For ease of replacement and access, position the unit 48 inches from the nearest obstruction or
adjacent wall.
• Low-hanging lights – The projection arm extends 3 1/3 feet from the unit while in operation. Ensure that the
projection arm will not come in contact with low-hanging light fixtures.
Air Ventilation
• Minimum clearance around the unit should be 4 inches.
• Air Vents – keep the air vents clear of objects and dust.
from 3M
41"
(1.04 m)
48"
(1.2 m)
48"
(1.2 m)
4" (100 mm)
88 1/2"
(2.25 m)
91"
(2.3 m)