Filter
Top Products
30
3M™ Digital WallDisplay
© 3M 2005. All Rights Reserved.
Menu System
Image Adj Sub-Menu
The Image Adjustment sub-menu adjusts the projected image settings for the VGA and DVI-D inputs. Use the
Vertical Position
and Horizontal Position sliders to reposition an image if portions are not visible. Use the
Phase and Sync sliders to eliminate vertical banding and noise.
Vertical Position Adjusts the vertical position of the projected image.
Horizontal Position Adjusts the horizontal position of the projected image.
Phase Adjusts the pixel sampling. Use this to reduce image noise and flicker.
Sync Adjusts the expected pixel number in a single video line. Use this to eliminate
banding.
Main Returns to main menu.
Exit Leaves the menu system.
To open the Image Adj
submenu:
1. Open the menu system by pressing the remote control
Menu button or any arrow on the Menu Keypad.
2. Select the Image Adj sub-menu by pressing the up or down arrows on the remote control Disk Pad
or
Menu Keypad
.
3. To open the Image Adj sub-menu, press the right arrow of the Disk Pad
or Menu Keypad.
4. Scroll to the desired slider and move it to the right or left as needed.
5. Close the menu system by pressing the
Menu button or scrolling to Exit and selecting it with the left or
right arrow of the Menu Keypad
.
To return to the main menu, select
Main and press the left or right arrow of the Disk Pad or Menu Keypad.