Filter
Top Products
22
3M™ Digital WallDisplay
© 3M 2005. All Rights Reserved.
Remote Control Unit
Remote Control Unit
Features
The remote control sensor is on the front lower panel of the 3M Digital WallDisplay unit. The distance between
the sensor and remote control must be shorter than 4 meters (13 feet).
The remote control unit has two keypads. The Forward keypad is above the flip-top cover. The Rear keypad is
beneath the cover. The Trigger Button is underneath the front IR Sensor of the remote control unit and can be
pressed easily with the index finger.
POWER
R
MOUSE
MENU
INPUT
BLANK
MUTE
POINTER
FREEZE
REVEAL TIMER
VOLUME
+
IR SENSOR
Transmits infrared signals to 3M
Digital WallDisplay unit.
DISK PAD
Press to control the computer’s
mouse, navigate the menu
system, or control the Pointer or
Reveal functions.
R MOUSE
Press for right-mouse-button
function in mouse mode.
MENU
Press to display onscreen
menu system.
BLANK
Press to turn the screen-blank
-
ing function on/off.
INPUT
Press to change source of
input.
VOLUME
Press to adjust the speaker
and Audio Out sound level.
TIMER
Press to turn on/off display of
countdown timer.
FREEZE
Press to turn the still-mode
function on/off.
REVEAL
Press to uncover part of the
screen from top to bottom or
from left to right.
LED
Indicates that remote control unit
is transmitting signal.
POWER
Press to turn 3M Digital
WallDisplay on/off.
MUTE
Press to turn the audio (speaker)
function on/off.
POINTER
Press to turn the pointing
function on/off.
FORWARD KEYPAD
REAR KEYPAD
TRIGGER BUTTON
Press for left-mouse
button functions.