Filter
Top Products
29
3M™ Digital WallDisplay
© 3M 2005. All Rights Reserved.
Menu System
Input Select Menu
The Input Select menu defines the displayed video source. When Input Select menu is selected, the current
video source is shown. The
Input options are: Computer (VGA Input), DVI-D, S-Video, Comp. Video (RCA
Video Input), and No Signal. An Input option is available to select when an active video source is connected to
the 3M Digital WallDisplay input connection.
To set the Input Select
menu:
1. Open the menu system by pressing the remote control
Menu button or any arrow on the Menu Keypad.
2. Select the Input Select menu function by pressing the up or down arrows on the remote control Disk Pad
or Menu Keypad.
3. Press the right arrow of the Disk Pad
or Menu Keypad repeatedly until the desired input option is shown.
4. Activate the input option by pressing the left arrow of the Disk Pad
or Menu Keypad.
5. Close the menu system by pressing the
Menu button or scrolling to Exit and selecting it with the right
arrow of the Menu Keypad
.
Reset All Menu
The Reset All menu function sets all menu settings to their default settings.
To turn the Reset All menu function on:
1. Open the menu system by pressing the remote control
Menu button or any arrow on the Menu Keypad.
2. Select the Reset All menu function by pressing the up or down arrows on the remote control Disk Pad
or
Menu Keypad
.
3. To activate the Reset All function, press the right arrow of the Disk Pad
or Menu Keypad.
4. Close the menu system by pressing the
Menu button or scrolling to Exit and selecting it with the right
arrow of the Menu Keypad
.