3M 9000PD Projector User Manual


 
24
3M™ Digital WallDisplay
© 3M 2005. All Rights Reserved.
Remote Control Unit
Rear Keypad
Pointer
Press to turn the pointing function on/off. A green dot will appear on the screen. The dot can be controlled by
pressing the arrows on the Disk Pad
.
Volume
Press the + button to increase or the - button to decrease the speaker loudness level. When the audio is muted, the
Volume +
or - buttons will also cancel the Mute function.
Timer
Press to turn the timing function on/off. The timer will display on the screen and begin to count down. To change
the Timer value, refer to the On Scrn Timer sub-menu in the Tools
menu.
Freeze
A moving image can be stilled or ‘frozen’ when the Freeze button is pressed. To release the Freeze function,
press the Freeze button again.
Reveal
Press to turn the screen-reveal function on/off. Press the Disk Pad in the desired reveal direction (e.g. press down
to reveal from the top down, etc.).
Trigger Button
On the underside of the remote control unit, beneath the IR sensor, press button for left-mouse-button functions.
POWER
R
MOUSE
MENU
INPUT
BLANK
MUTE
POINTER
FREEZE
REVEAL TIMER
VOLUME
+