Filter
Top Products
Hardware Setup
3
4. Connecting a Dial-up Modem: If you use an external dial-up modem or ISDN
modem, connect it to the COM port on the rear panel.
5. Connecting Printer: If you have a printer that you want to share between
computers, connect it to the Printer port using a standard parallel printer cable.
Or, if your printer already has an Ethernet card, it may be plugged into ports
1-3.
6. Power: Plug the power adapter into the power jack (5 V/2 A).
Configuring Wireless Connections
Make sure each wireless network adapter is properly installed along with all
associated drivers and utilities. (Please see your wireless adapter’s documentation
for complete setup information.) You may need to change certain settings for your
wireless network card to communicate with the Gateway. Use the following values
where they apply:
Network Type: Infrastructure
SSID: default
Channel: 6 for North America; 7 for European (ETSI); 7 for Japan
WEP Security: Disable
Note: We recommend establishing your wired connections to the Gateway before
setting up your wireless connections.