Filter
Top Products
Quick Installation Guide
26
2. In the “Command Prompt” window, type “IPCONFIG/RELEASE” and press the
<ENTER> key.
3. Type “IPCONFIG /RENEW” and press the <ENTER> key. Verify that your IP
address is now 192.168.2.xxx, your Subnet Mask is 255.255.255.0 and
your Default Gateway is 192.168.2.1. These values confirm that your
CheetahAccess Wireless Gateway is functioning.
4. Type “EXIT” and press <ENTER> to close the “Command Prompt” window.
Now that your computer is configured to connect to your CheetahAccess Wireless
Gateway, please continue to “Configuring Your CheetahAccess Wireless Gateway”
on page 33.