Filter
Top Products
Quick Installation Guide
50
Configuring Your Computer for the Gateway Print
Server
If you are not connecting your printer to your CheetahAccess Wireless Gateway,
skip this section.
With the CheetahAccess Wireless Gateway’s built-in print server, you can connect
your printer to the CheetahAccess Wireless Gateway and print from any computer
on your network. Each computer needs to have a “client” installed that will
communicate with the CheetahAccess Wireless Gateway’s print server. Windows
2000 and UNIX and Linux operating systems have a print client already installed. If
you are running Windows 95, 98, ME, 2000, or NT, you must use the Accton
CheetahAccess Print Server Monitor as your print client.
Configuring Your Computer for the Gateway Print Server for
Windows 95/98/NT/ME/2000
Step 1: Installing the Print Server Monitor
You must first install the software that will allow your programs to print to the printer
attached to the CheetahAccess Wireless Gateway.
1. Insert the Installation CD into your CD-ROM drive.
2. Click “Start” and “Run...”
3. Type “D:\PrintSvr\Setup” and click “OK.”