Filter
Top Products
Configuring Your Gateway
47
5. If you are connecting to the Internet through PPPoE, you probably do not need
to enter anything here. However, if there is another DNS server that you would
rather use, enter the DNS server addresses in the spaces provided.
6. Click “ENTER” when finished.
Many ISP’s use modems that automatically configure. Sometimes connection
information is stored on the modem and needs to be updated. You may need to shut
down and restart your modem after you have configured your CheetahAccess
Wireless Gateway.
7. Restart your DSL modem by removing the power, waiting a few seconds, and
then reconnecting it.
Congratulations! Configuration is complete and your CheetahAccess Wireless
Gateway is now connected to the Internet. There are also some advanced
configuration options that may be configured, but we do not recommend making any
changes to these options unless you need to.
For instructions for the advanced configuration options, please refer to Chapter 4 of
the User Guide found on the CD.