Filter
Top Products
Quick Installation Guide
54
5. Select the Accton CheetahAccess Print Server Monitor (the default port name
is “AC-IG2004W”) and click “Configure Port...”
6. Enter the CheetahAccess Wireless Gateway’s IP address in the “IP address”
field (default is 192.168.2.1) and click “OK.”
7. You will be asked if you want to print a test page. Click “Yes” to make sure that
your printer is configured correctly.
8. Your printer will now appear in the “Printers” window. Your computer is
configured to print via the CheetahAccess Wireless Gateway Print Server.
Repeat these steps on each computer connected to the CheetahAccess
Wireless Gateway.
Configure the Network Printer in Unix Systems
Follow the traditional configuration procedure on Unix platforms to set up the
CheetahAccess Wireless Gateway print server. The printer name is “lpt1.”