Filter
Top Products
Configuring Your Gateway
49
3. Enter your ISP account user name and password in the “Dial-Up Account
Information.”
4. Enter the “Modem Initialization String” provided by your modem manufacturer.
The following is a sample initialization string: “ATQ1SO=1&D0&K0&W” as
defined below:
Q1 : Inhibit result codes to DTE
S0=1 : Auto answer on first ring
D0 : Don't care DTR
K0 : Disables DTE/DCE flow control
W : Write command to modem memory
5. In the “Maximum Idle time” field, enter the maximum idle time for the
CheetahAccess Wireless Gateway (in seconds).
6. If you are assigned a dynamic IP address every time you dial up, select “No” for
“Has your Internet Service Provider given you an IP address?” However, if your
ISP has assigned a fixed IP address for you to use, select “Yes” for this item
and enter the IP address and subnet mask.
7. If your ISP has given you a secondary phone number, or if you have a
secondary Internet service account, then fill in the relevant fields under
“Secondary Dial-up.”