Filter
Top Products
Configuring Your Gateway
35
6. In the “Change Password” screen, enter your current password in the “Current
Password” field. If you have not set a password before, leave it blank. Choose
a password for your CheetahAccess Wireless Gateway and enter it in the next
two fields, “New Password” and “Re-Enter Password for Verification.”
7. Click “ENTER” when finished.
8. Select your time zone from the list and click “ENTER.”
The LAN screen is where you configure the LAN (Local Area Network) settings of
your CheetahAccess Wireless Gateway. These settings will only be visible to your
local network and not to the Internet.