Filter
Top Products
Quick Installation Guide
36
9. In most applications, you should not change the “IP address” from the default
(192.168.2.1). However, if you are installing your CheetahAccess Wireless
Gateway within an existing network, you may need to change it to match your
current addressing scheme.
By using the CheetahAccess Wireless Gateway’s built-in DHCP (Dynamic Host
Configuration Protocol) server you are allowing the CheetahAccess Wireless
Gateway to handle all the IP addressing on your Local Area Network (LAN). This
can save you much of the time and hassle of setting up your network. If you have a
server on your network that requires a static IP address, you may still use the DHCP
server and manually assign a static IP address to your server. We recommend
leaving the DHCP Server “Enabled.”