Filter
Top Products
Configuring Your Gateway
41
5. If you are connecting to the Internet with a dynamic IP address, you probably
do not need to enter anything here. However, if there is a DNS server that you
would rather use, enter the DNS server addresses in the spaces provided.
6. Click “ENTER” when finished.
Many ISP’s use modems that automatically configure themselves. Sometimes
connection information is stored on the modem and needs to be updated. You may
need to shut down and restart your modem after you have configured your
CheetahAccess Wireless Gateway.
7. Restart your cable modem by removing the power, waiting a few seconds, and
then reconnecting it.
Congratulations! Configuration is complete and your CheetahAccess Wireless
Gateway is now connected to the Internet. There are also some advanced
configuration options that may be configured, but we do not recommend making any
changes to these options unless you need to. You can consult the User Guide for
information on these advanced settings.
For instructions for the advanced configuration options, please refer to Chapter 4 of
the User Guide found on the CD.