Filter
Top Products
Quick Installation Guide
12
Configuring Your Computer with Windows 2000
Step 1. Configure TCP/IP Settings
After you have completed the hardware setup by connecting your devices, configure
your computer to connect to your CheetahAccess Wireless Gateway. Many ISPs
issue these numbers automatically using a networking technology known as
Dynamic Host Configuration Protocol, or DHCP. Other ISPs will specify your IP
address and associated numbers, which you must enter manually. This is also
known as a static IP address. How your ISP assigns your IP address determines
how you will configure your computer.
Here is what to do:
1. From the Windows desktop, click the “Start” button. Choose “Settings,” then
click “Control Panel.”
2. Double-click the “Network & Dial-Up Connections” icon.