Accton Technology ES3552XA Switch User Manual


 
System Management Commands
4-33
4
Example
Related Commands
ip http secure-port (4-33)
copy tftp https-certificate (4-70)
ip http secure-port
This command specifies the UDP port number used for HTTPS/SSL connection to
the switch’s web interface. Use the no form to restore the default port.
Syntax
ip http secure-port port_number
no ip http secure-port
port_number – The UDP port used for HTTPS/SSL.
(Range: 1-65535)
Default Setting
443
Command Mode
Global Configuration
Command Usage
You cannot configure the HTTP and HTTPS servers to use the same port.
If you change the HTTPS port number, clients attempting to connect to the
HTTPS server must specify the port number in the URL, in this format:
https://device:port_number
Example
Related Commands
ip http secure-server (4-32)
Console(config)#ip http secure-server
Console(config)#
Console(config)#ip http secure-port 1000
Console(config)#