Accton Technology ES3552XA Switch User Manual


 
Rate Limit Commands
4-145
4
Example
rate-limit granularity
Use this command to define the rate limit granularity for the Fast Ethernet ports, and
the Gigabit Ethernet ports. Use the no form of this command to restore the default
setting.
Syntax
rate-limit {fastethernet | gigabitethernet} granularity [granularity]
no rate-limit {fastethernet | gigabitethernet} granularity
fastethernet – Fast Ethernet granularity
gigabitethernet – Gigabit Ethernet granularity
granularity – Sets rate limit granularity for the system. For Fast Ethernet,
choose 512 Kbps, 1 Mbps, or 3.3 Mbps. For Gigabit Ethernet, only one
granularity option is supported, 33.3 Mbps
Default Setting
Fast Ethernet interface – 3.3 Mbps
Gigabit Ethernet interface – 33.3 Mbps
Command Mode
Global Configuration (Ethernet, Port Channel)
Command Usage
Actual rate limit = Rate limit level * Granularity
Example
The following sets Fast Ethernet granularity to 1 Mbps, and Gigabit Ethernet
granularity to 33.3 Mbps.
show rate-limit
Use this command to display the rate limit granularity.
Default Setting
Fast Ethernet interface – 3.3 Mbps
Gigabit Ethernet interface – 33.3 Mbps
Command Mode
Privileged Exec
Console(config)#interface ethernet 1/1
Console(config-if)#rate-limit input level 20
Console(config-if)#
Console(config)#rate-limit fastethernet granularity 1000
Console(config)#rate-limit gigabitethernet granularity 33300
Console(config)#