Filter
Top Products
VLAN Commands
4-193
4
switchport private-vlan mapping
Use this command to map an interface to a primary VLAN. Use the no form to
remove this mapping.
Syntax
switchport private-vlan mapping primary-vlan-id
no switchport private-vlan mapping
primary-vlan-id – ID of primary VLAN. (Range: 1-4094, no leading zeroes).
Default Setting
None
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
Promiscuous ports assigned to a primary VLAN can communicate with any
other promiscuous ports in the same VLAN, and with the group members
within any associated secondary VLANs.
Example
show vlan private-vlan
Use this command to show the private VLAN configuration settings on this switch.
Syntax
show vlan private-vlan [community | isolated | primary]
• community – Displays all community VLANs, along with their associated
primary VLAN and assigned host interfaces.
• isolated – Displays an isolated VLAN, along with the assigned
promiscuous interface and host interfaces. The Primary and Secondary
fields both display the isolated VLAN ID.
• primary – Displays all primary VLANs, along with any assigned
promiscuous interfaces.
Default Setting
None
Command Mode
Privileged Executive
Console(config)#interface ethernet 1/2
Console(config-if)#switchport private-vlan mapping 2
Console(config-if)#