Filter
Top Products
Command Line Interface
4-222
4
• IGMP filtering and throttling only applies to dynamically learned multicast
groups, it does not apply to statically configured groups.
• The IGMP filtering feature operates in the same manner when MVR is used
to forward the multicast traffic.
Example
ip igmp profile
This command creates an IGMP filter profile number and enters IGMP profile
configuration mode. Use the no form to delete a profile number.
Syntax
[no] ip igmp profile profile-number
profile-number - An IGMP filter profile number. (Range: 1-4294967295)
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
A profile defines the multicast groups that a subscriber is permitted or denied
to join. The same profile can be applied to many interfaces, but only one
profile can be assigned to one interface. Each profile has only one access
mode; either permit or deny.
Example
permit, deny
This command sets the access mode for an IGMP filter profile. Use the no form to
delete a profile number.
Syntax
{permit | deny}
Default Setting
Deny
Command Mode
IGMP Profile Configuration
Console(config)#ip igmp filter
Console(config)#
Console(config)#ip igmp profile 19
Console(config-igmp-profile)#