Filter
Top Products
Chapter 3 75
Disassembling the External Modules
Disassembling the HDD Module
1. Remove the screw holding the HDD cover.
2. Take the HDD out of the HDD cover.
3. Remove the four (two on each side) screws on HDD carrier.
4. Remove the HDD from HDD carrier.
5. Disconnect the HDD connector.
Disassembling the Optical Disk Drive Module/Combo Drive Module
1. Unscrew the two screws holding the ODD cover.
2. Remove another two screws that fasten the ODD cover.
3. Take the ODD assembly out of the ODD cover.
4. Remove the two screws that secure the ODD PCB board.
TM420.book Page 75 Monday, September 23, 2002 10:27 AM