Filter
Top Products
Chapter 2 41
Info.
This menu provides you the information of the system.
Parameter Description
Floppy Drive The Floppy Drive status is auto detected by the system. The information page would
display “1.44MB, 3
1/2
if floppy drive exists; it would display “Not installed” if floppy drive
does not exist.
IDE1 Model Name Shows the Model name of HDD installed on Primary IDE master. The system will auto
detect the hard disk model name. “None” means the hard disk drive is not existing or
unknown type.
IDE1 Serial Number This item displays the Model Name of HDD installed on Primary IDE master. If no hard
disk or other devices are installed on Primary IDE master, this item will display a blank
line.
IDE2 Model Name Displays the Model Name of Device installed on Secondary IDE master. The hard disk or
CD-ROM model is automatically detected by the system. If the hard disk drive or CD-ROM
is not existing or unknown type, this field would display “None”.
IDE2 Serial Number This field shows the Serial Number of HDD installed on Secondary IDE master. If no hard
disk drive or other devices are installed on Primary IDE master, it will display a blank line.
System BIOS Version Displays system BIOS version
VGA BIOS Version Displays VGA BIOS version
Serial Number Displays the serial number of the unit.
SG_TM420_Ch2.fm Page 41 Thursday, September 26, 2002 9:40 AM