Filter
Top Products
SDR2-USB Configuration Guide rev 1.0 Service and Support
27
6
6
6. Service and
Support
6.1 Exception Codes
The following are common error codes encountered when using DataBridge
SDR2-USB products. To determine which error has occurred, watch the
"exception" indicator on the SDR2-USB's front panel and count the number
of rapid blinks. Each sequence is separated by a 1 second pause in the blink
pattern.
Exception 2: Root Directory Full
A FAT (FAT16) root directory can have only 512 directory entries (fewer if
long filenames are used). Delete files from the root directory, record to a
subfolder in the root directory, or use FAT32 formatting to overcome this
limitation.
Exception 3: Disk Full
The disk has no (or almost no) available space for files. Delete files from the
disk to ensure space is available.