Filter
Top Products
Service and Support SDR2-USB Configuration Guide rev 1.0
28
Exception 4: Bad Boot Record
Occurs when the disk is completely unformatted or formatted for an
unsupported file system.
Use format /FS:FAT from the Windows command prompt to ensure
proper FAT formatting.
Exception 5: Hardware Error
Usually occurs when the SDR2-USB cannot reset the USB storage device.
Try ejecting and reinserting the card or using a new card and contact
Acumen if problem persists.
Exception 6: EEPROM Error
Rare hardware error. Contact Acumen to discuss repair or replacement.
Exception 7: Cache Error
Rare hardware error. Contact Acumen to discuss repair or replacement.
Exception 8: Buffer Error (firmware error)
Rare error that may occur in customized or beta firmware versions. Contact
Acumen to report.
Exception 9: Tasking Error (firmware error)
Rare error that may occur in customized or beta firmware versions. Contact
Acumen to report.
Exception 10: USB Error
The USB storage media has reported a fatal error to the SDR2-USB.
Reinsert/replace the media and contact Acumen if problem persists.
Exception 11: Directory Creation Error
Rare. The SDR2-USB cannot create the subdirectory files are to be
recorded to. Try using a different directory name or reformatting the media.
Exception 12: FAT12 File System Detected
The SDR2-USB has determined that the USB media was formatted using
the FAT12 file system, which is unsupported. Reformat the USB storage
device using the /A:512 option (Windows 2000/XP) and retry.