Setting Up and Testing the Desktop Unit
Campus-RS Desktop Unit User Manual 2-3
INSTALLING AN INTERFACE CARD
You can install any ADC Campus-RS interface card into the Campus-RS
Desktop Unit.
To install the interface card:
1 Slide the card into the guide rails in the rear of the Desktop Unit.
2 Gently press the card into place until it is seated firmly in the mating
connector.
3 Use the two screws on the card to secure into place.
DETERMINE THE CORRECT HDSL OPERATING
M
ODE
The Campus-RS Desktop Unit supports two operating modes:
• Standard Mode provides HDSL compatibility with legacy Campus
products, such as the Campus-T1 Desktop Unit.
CAMPUS-RS
C
O
N
S
O
L
E
L
IN
E
C
F
G
FRACTIONAL V.35
Guide rail
Interface card
Desktop unit
120 VAC@60Hz
or 220 VAC@
50Hz
.2A M
ax