Filter
Top Products
Setting Up and Testing the Desktop Unit
2-6 Campus-RS Desktop Unit User Manual
Standard Mode Configuration
This section continues from Step 5 in the previous section to set a standard
HDSL transmission rate.
1 If the Operating Mode is set to STANDARD, proceed to Step 3.
Otherwise, press Enter.
2 Press Next until STANDARD displays, then press Enter. The LCD
displays OPERATING MODE.
3 Press Next until HDSL RATE displays, then press Enter.
4 Press Next until the desired HDSL transmission rate displays, then
press Enter.
To continue testing and setting up the system, proceed to “Set the HDSL
Transceiver Mode” on page 2-7.
Extended Mode Configuration
This section continues from Step 5 on page 2-5 to set an extended HDSL
transmission rate.
1 If the Operating Mode is set to EXTENDED, skip to Step 3. Otherwise,
press Enter.
2 Press Next until EXTENDED displays, then press Enter. The LCD
displays OPERATING MODE.
3 Press Next until LOOP MODE displays, then press Enter.
4 Press Next to display either 2 LOOPS and 1 LOOP, then press Enter to
select the option displayed. The LCD displays LOOP MODE.
5 Press Next until HDSL RATE displays, then press Enter.
6 Press Next until the desired HDSL transmission rate displays, then
press Enter.
To continue testing and setting up the system, proceed to “Set the HDSL
Transceiver Mode” on page 2-7.