Filter
Top Products
Setting Up and Testing the Desktop Unit
2-8 Campus-RS Desktop Unit User Manual
It is recommended that the Transceiver Mode be set as follows to avoid any
link startup or operation problems:
• Campus-RS = MASTER
• Campus E1/T1/768 = SLAVE
If one or both units are already set to AUTO and the HDSL link is active,
disconnect the HDSL link, change the settings as recommended, and
reconnect the link. This will assure the link integrity on any subsequent
startups.
This situation does not apply to a circuit with two Campus-RS
units. You may leave the units set to their default setting of
AUTO, and they will operate properly.