Filter
Top Products
Setting Up and Testing the Desktop Unit
Campus-RS Desktop Unit User Manual 2-11
TEST THE DATA PORT
The data port of most Campus interface cards can be tested prior to installing
the Desktop Unit in a remote location. This minimizes the chance of having
to make additional trips to the remote site to troubleshoot problems.
To test the data port, initiate a loopback from the local data port toward the
local data port. Refer to the interface card user manual for instructions on
initiating loopbacks.
Some interface cards, such as the Campus-REX, do not
support loopbacks on the data port. Refer to the interface
card user manual to determine if such loopbacks are
supported.