Filter
Top Products
Chapter 8. Remote/Management Menus
8-2 TDU 120e User Manual 61202156L2-1A
UNIT ACCESS TABLE
This menu edits/creates the Unit Access Table and stores
the Unit ID, Passcode, and Unit Type for units connected
via chain ports or connected remotely to the TSU/TDU
(see Figure 8-1).
An entry in the table is required only to support proxy
SNMP MIB access or polling. For MIB access, an entry is
required only if the unit's passcode is not the same as the
D
EFAULT
U
NIT
P
ASSCODE
, or the unit is a single port TSU
Standalone.
Units accessed via T-Watch PRO over TCP/IP use the
unit ID and passcode set by T-Watch PRO running on the
PC.
Figure 8-1. Unit Access Table
It is not necessary to have an entry in this table for a remote unit in order
to Telnet to it or forward SNMP traps from it. In the Telnet case, the
Remote Menu Access menu is selected from the Main menu and a unit
ID is entered which may or may not be in the Unit Access Table.
____________________________Unit Access Table________________________
Unit ID Passcode Type Polled Poll Status
20
3
6
8
DEFAULT
0033
0095
0022
Standard
Standard
TSU Standalone
Standard
No
Ye s
No
Ye s
UP
UP
1) Add New Unit
2) Modify Unit
3) Delete Unit
4) Default Unit Passcode
5) OK
0022