Filter
Top Products
Chapter 5. Configuration Menu
61202156L2-1 TDU 120e User Manual 5-17
After editing Map A, press
Enter
to record the Map A set-
tings and activate the selection fields for Map B. Use the
same operation to edit switching time for Map B.
When ESF is used with an FDL channel between units,
the units automatically coordinate the automatic map
switch by sending a map switch command from end-to-
end over the FDL. Only one end needs to be set to A
UTO
for this to work.
Map In Use
This menu item controls the DS0 map the TDU 120e uses
and displays the map in current use.
DS0 Map A and DS0 Map B
The DS0 maps designate which DS0s are assigned to
which port. The three maps are:
DS0 Map A
Default map.
DS0 Map B
Alternate map.
Temp
Temporary map used as a scratch pad.