Filter
Top Products
Chapter 5. Configuration Menu
5-20 TDU 120e User Manual 61202156L2-1
Editing the Temp Map
If further changes to the T
EMP
map are needed, do the
following:
Applying the Temp Map
Once the Temp map reflects the desired configuration,
use selections 8 or 9 to apply this configuration to Map A
or B, respectively.
Copying Map
To copy Map A to Map B, copy Map A to the Temp map
and then apply the Temp map to Map B. See Figure 5-11.
Step Action Explanation
1
Use selection 7 to enter the
Temp map edit mode.
Upon entering this mode, the cursor
location moves to DS0 number one in
the DS0 field of the Temp map.
2
Move the cursor from one
DS0 to another by using the
up and down arrows
Locate the DS0 number whose
assigned port needs to be changed.
3
Press
Enter
. The cursor will move into the P
ORT
field.
4
Use the
up
and
down
arrows
to scroll through the
possible port selections.
To restore the previous port
assignment and return to the DS0 field,
press
ESC
.
5
To save the current selected
port and return to the DS0
field, press
Enter
.
6
When the cursor is again
located in the Temp map
DS0 field, press
Esc
.
This causes the cursor to return to
selection 1 below the Temp map
display.