ADTRAN TDU 120e Network Card User Manual


 
Chapter 5. Configuration Menu
61202156L2-1 TDU 120e User Manual 5-19
Creating a DSO Map
To configure a DS0 Map, perform the following steps:
Initializing the Temp Map
Upon entering the DS0 maps C
ONFIGURATION
menu, the
Temp map reflects its last configured state.
Step Explanation
1
Initialize the T
EMP
Map to one of three configurations
(current Map A, current Map B, or all IDLE). This step
is optional.
2
Edit the Temp Map so that it reflects the desired map
configuration.
3
Replace the current DS0 Map A or B configuration
with the Temp map configuration.
If you want to... Enter selections...
Initialize the Temp map from its
current configuration to one which
reflects the currently stored Map A
or B configurations, respectively.
1 - 2
Initialize the Temp map to an all
IDLE state.
3