Filter
Top Products
Chapter 5. Configuration Menu
5-16 TDU 120e User Manual 61202156L2-1
SLIP Flow Control
This is used to activate flow control on the Chain-In port
when used as the SLIP interface. Hardware mode uses
RTS and CTS.
Choices: N
ONE
, H
ARDWARE
Proxy Traps
This determines whether or not traps are forwarded to
the IP Interface from units being “proxied” for.
Choices: E
NABLE
, D
ISABLE
External Alarm
Sets unit to accept or reject external alarms attached to
Pin 6 or Pin 7 of the Chain-In Port. A connection to
ground indicates an alarm condition.
Choices: E
NABLE
, D
ISABLE
Exit
This selection will exit to the main configuration menu.
Map Exchange
The M
AP
E
XCHANGE
menu enables and sets the automatic
time of day map switch. The unit provides selection of
the hour, minute, and seconds for the map switching to
take place. The menu items are:
OFF
Indicates the map in use does not change. The automatic
map change feature is disabled.
AUTO
Indicates that the map in use will change at a user-
selected time of day. The automatic map change feature
is enabled.
When A
UTO
is selected, the unit displays the screens to
set times for switching.