![](http://pdfasset.owneriq.net/2/8e/28e11347-f9d5-476f-8c53-845e906a3d11/28e11347-f9d5-476f-8c53-845e906a3d11-bgc7.png)
199
Using the Pattern Generator
Setting Up the Proper Configurations
To build a label
When you build a label, you are grouping channels under a label name
and mapping the selected channels to the probes on the associated
pods. A label may contain a maximum of 32 channels, however, a single
channel cannot be used under more than one label.
1 Select the label’s channel assignment field.
2 Select the desired channels.
* (asterisk) = on
. (period) = off
Only the selected channels can output pattern generator signals.
3 Select Done.