Filter
Top Products
7
Installing the Agilent E1439
To store the module
To store the module
Store the module in a clean, dry, and static free environment.
For other requirements, see storage and transport restriction in “Technical Specifications”.
To transport the module
• Package the module using the original factory packaging or packaging identi-
cal to the factory packaging.
• If returning the module to Agilent Technologies for service, attach a tag
describing the following:
• Type of service required
• Return address
• Model number
• Full serial number
In any correspondence, refer to the module by model number and full serial number.
• Mark the container FRAGILE to ensure careful handling.
• If necessary to package the module in a container other than original packaging, observe the
following (use of other packaging is not recommended):
• Wrap the module in heavy paper or anti-static plastic.
• Protect the front panel with cardboard.
• Use a double-wall carton made of at least 200-pound test (32 ECT) material.
• Cushion the module to prevent damage. For example, several layers of plastic bubble
wrap is usually sufficient.
Caution Do not use styrene pellets in any shape as packing material for the module. The pellets do
not adequately cushion the module and do not prevent the module from shifting in the
carton. In addition, the pellets create static electricity that can damage electronic
components.