64
Agilent E1439 Programmer's Reference
Functions listed by functional group
Identification
age1439_product_id_get (on page 158) −returns the module’s product identification string
age1439_options_get (on page 157) −returns the module’s options
age1439_serial_number (on page 157) −sets the module’s serial number for product repair
purposes
age1439_serial_number_get (on page 157) −returns the module’s serial number
age1439_revision_query (on page 169) −returns strings that identify the date of the module’s
firmware revision
Interrupts
age1439_attrib_get (on page 74) −gets low-level attributes of current I/O library session
age1439_interrupt_setup (on page 146) −sets all interrupt parameters
age1439_interrupt_mask_get (on page 146) −gets the interrupt event mask
age1439_interrupt_priority_get (on page 146) −gets the VME interrupt line
age1439_interrupt_restore (on page 145) −restores the interrupt masks to the most recent set-
ting
Measurement control
age1439_meas_control (on page 151) −initiates and controls measurements in multi-module
systems
age1439_meas_init (on page 154) −initiates a measurement without first checking for valid
hardware setup
age1439_meas_start (on page 155) −checks for valid hardware setup and then initiates a mea-
surement
age1439_reset (on page 167) −places the module in a known state
age1439_reset_hard (on page 168) −resets the module hardware
Timing
age1439_clock_setup (on page 78) −sets all timing parameters for commonly used measure-
ment setups
age1439_clock_setup_get (on page 78) −gets the current clock setup
age1439_clock_fs (on page 76) −provides the frequency of an external sample clock
age1439_clock_fs_get (on page 76) −gets the current external sample clock frequency
age1439_adc_clock (on page 72) −specifies the ADC clock source
age1439_adc_clock_get (on page 72) −gets the ADC clock source
age1439_adc_divider (on page 73) −determines which divider is applied to the ADC clock
source
age1439_adc_divider_get (on page 73)−gets the module's current clock divider state
age1439_ext_sample_sync (on page 104) −enables and disables external sample sync
age1439_ext_sample_sync_get (on page 104) −gets the state of external sample sync
age1439_front_panel_clock_input (on page 131) −specifies the source for the front panel
clock
age1439_front_panel_clock_input_get (on page 131) −gets the front panel clock source
age1439_reference_clock (on page 165) −selects the source of the reference clock
age1439_reference_clock_get (on page 165) −gets the source of the reference clock
age1439_reference_prescaler (on page 166) −selects prescaling of the reference clock
age1439_reference_prescaler_get (on page 166) −gets prescaling of the reference clock
age1439_smb_clock_output (on page 173) −specifies which clock to output from the SMB