Filter
Top Products
71
Agilent E1439 Programmer's Reference
Functions listed alphabetically
most recent trigger event
age1439_trigger_delay_get (on page 183) −gets the trigger delay time
age1439_trigger_gen (on page 183) −determines whether a module can generate a trigger
age1439_trigger_gen_get (on page 183) −gets the trigger generation status
age1439_trigger_magdwell (on page 183) −specifies the dwell time (in samples) before a
magnitude trigger
age1439_trigger_magdwell_get (on page 183) −gets the magnitude trigger dwell time in
samples
age1439_trigger_maglevel (on page 183) −specifies the threshold for a magnitude trigger
age1439_trigger_maglevel_get (on page 183) −gets magnitude trigger threshold
age1439_trigger_phase_actual_get (on page 182) −returns a representation of the phase
value of the LO at the most recent trigger point
age1439_trigger_setup (on page 183) −sets all parameters associated with triggering the
beginning of data collection
age1439_trigger_slope (on page 183) −selects a positive or negative trigger
age1439_trigger_slope_get (on page 183) −gets trigger slope
age1439_trigger_type (on page 183) −determines the trigger type
age1439_trigger_type_get (on page 183) −gets trigger type
age1439_vcxo (on page 187) −selects whether the module should use an internal clock
source
age1439_vcxo_get (on page 187) −gets whether the internal clock source is on or off
age1439_vxi_clock_output (on page 188) −selects which clock drives the VXI clock
age1439_vxi_clock_output_get (on page 188) −gets which clock drives the VXI clock
age1439_wait (on page 189) −facilitates the synchronization and control of multi-module
systems