Filter
Top Products
Raven X EV-DO for Verizon - User Guide, version 2.34 61
AT Commands: Serial
This group includes commands specific to the serial port.
+++
Serial
FIGURE 1. Common : Serial
Note: This command is not proceeded by AT nor does it require a carriage return
(enter).
There must be an idle time (set by S50) on the serial port before and after this com-
mand.
The “+” is ASCII 0x2B.
AT Escape sequence.
If the Raven X is in a data mode (any mode other than PassThru), this command causes the modem to
re-enter AT command mode.
Cannot be configured in Wireless Ace.
Note: This command does nothing if DAE=1.