Filter
Top Products
35
Parameter Description
IP Mode Select the type of how you obtain IP address from your service
provider here: Static IP Address or Dynamic IP Address.
My IP Address Enter the IP address assigned by your ISP if you select Static IP
Address.
My Subnet Mask Enter the Subnet Mask assigned by your ISP if you select Static
IP Address.
Gateway IP Enter the Gateway IP address assigned by your ISP if you select
Static IP Address.
Server IP Address/Name Enter the IP address of the PPTP server.
PPTP Account Enter the User Name for your PPTP account here. You can
obtain this information from your ISP.
PPTP Password Enter the password for your PPTP account here. You can obtain
this information from your ISP.
Connection ID Enter the connection ID if your ISP requires it. This is optional.
Maximum Idle Time The amount of time of inactivity before disconnecting your PPTP
session. Set it to zero or enable “Auto-reconnect” to disable this
feature.
Connection Control There are 3 modes for you to control the Internet connection:
Connect-on-demand: Router will connect to the ISP when its
client send outgoing packets.
Auto Reconnect (Always-on): Router will keep the connection
to the ISP after the connection is established.
Manually: Router will not connect to the ISP until user clicks the
Connect button on the Status-page.
Maximum Transmission Unit (MTU) Most ISPs offer MTU value to users. The default MTU value is 0
(auto).