Filter
Top Products
54
Protocol This is the protocol type to be forwarded. You can choose to
forward “TCP” or “UDP” packets only or select “Both” to forward
both “TCP” and “UDP” packets.
Enable Check to enable this forwarding rule.
Schedule Rule# Enter a Schedule Rule number to enable the forwarding rule only
within the desired time frame. Please refer to 3.4.7 Schedule
Rule for detailed setting instructions. You can set 0 to enable the
forwarding rule always. If you assign a schedule rule (for example,
9am to 5pm) to ID#1, users are only allowed to access the FTP
server from 9am to 5pm.
Next>> / Previous<< Access the next/previous 10 port forwarding rules.
Click Save after you finished all settings.