Filter
Top Products
82
Static Routing Select Enable or Disable to enable or disable Static Routing
function.
Destination Enter a destination IP address. The Destination IP is the address
of the remote network or host to which you want to assign a static
route.
Subnet Mask Enter the subnet mask. The Subnet Mask determines which
portion of a Destination IP address is the network portion, and
which portion is the host portion.
Gateway Enter the gateway IP address. This is the IP address of the
gateway device that allows for contact between the Router and
the remote network or host.
Hop Specify the number of next hop.
Enable Check or uncheck Enable to enable or disable the static routing
rule.
Click on Save after you finished all settings.