56
Note: Only one PC can use each Special Application tunnel at same time.
If the mechanism of Special Applications fails to make an application work, try setting
your computer as the DMZ host instead.
Click Save after you finished all settings.
3.2.3 Miscellaneous
If you have a local client PC that cannot run an Internet application (e.g. Games) properly
from behind the NAT firewall, then you can open the client up to unrestricted two-way
Internet access by defining a DMZ Host. The DMZ function allows you to re-direct all
packets going from your WAN port IP address to a particular IP address in your LAN.
You can configure DMZ at this page, as well as UPnP and other settings.
Parameter Description
IP Address of DMZ Host Enter the local IP address that you wish to open DMZ. If the
application still doesn’t work on your computer after you open
DMZ, you can try to enable Super DMZ for that computer.