Filter
Top Products
42
Configuring Security - WEP
Note: IEEE802.11n only supports WPA2-PSK or WPA-PSK AES encryption. If you use WEP as
your encryption, wireless data rate will drop to 54Mbps (802.11g standard).
Key Mode: Select HEX or ASCII. You can select ASCII (alphanumeric format) or
Hexadecimal (in the “a~f” and “0~9” range) for the key format.
WEP: Select 64 bits or 128 bits key length.
Key 1~4: Select a WEP Key you wish to use and enter key value.
If you select HEX and 64 bits, enter a 10-digit Hex key, for example,
“12345abcde”.
If you select ASCII and 64 bits, enter a 5-digit ASCII key, for example,
“xyz01”.
If you select HEX and 128 bits, enter a 26-digit Hex key, for example,
“12345abcde67890bcdef123456”.
If you select ASCII and 128 bits, enter a 13-digit ASCII key, for
example, “wepkeyexample”.
Configuring Security - WPA-PSK / WPA2-PSK
Wi-Fi Protected Access (WPA) is an advanced security standard. You can use a
pre-shared key (PSK) to authenticate wireless stations and encrypt data during