Filter
Top Products
Configuring High Availability VLANs
Release 5.1.6.R02 User Guide Supplement June 2005 page 3-19
Displaying High Availability VLAN Status and
Statistics
You can use CLI show commands to display the current configuration and statistics of high availability
VLANs on a switch. These commands include the following:
To display the status and configuration of high availability VLANs you use the show mac-address-table
port-mac command. To display the status and configuration of all high availability VLANs on a switch
enter:
-> show mac-address-table port-mac
A screen similar to the following will be displayed:
Port mac configuration for vlan 10
Bandwidth : 15 MB/sec
Ingress Port list:
3/5 3/7
Egress Port list:
3/9 3/6
Mac Address list:
00:DA:95:3C:44:55
00:13:14:34:5E:78
01:23:45:C1:17:21
Port mac configuration for vlan 20
Bandwidth : 15 MB/sec
Ingress Port list:
1/4 8/2
Egress Port list:
3/9 3/6
Mac Address list:
00:11:22:33:44:55
07:23:14:34:31:25
00:23:45:67:43:04
To display the status and configuration of a single high availability VLAN enter show mac-address-table
port-mac vlan followed by the VLAN’s ID number. For example, to display the status and configuration
of high availability VLAN 10 enter
-> show mac-address-table port-mac vlan 10
show mac-address-table port-
mac
Displays the status and configuration of high availability VLANs.
show vlan Displays a list of all VLANs configured on the switch and the status of
related VLAN properties (e.g., admin and Spanning Tree status and
router port definitions).
show vlan port Displays a list of VLAN port assignments.