Filter
Top Products
ipv6 rip debug-level IPv6 Commands
page 2-70 Release 5.1.6.R02 User Guide Supplement June 2005
ipv6 rip debug-level
Configures the RIPng debug level for all debug types.
ipv6 rip debug-level level
Syntax Definitions
level Debug level. Valid range is 0 - 255.
Defaults
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
• This command sets the debug level for all configured types. You cannot set different levels for each
type.
• Use the ipv6 rip debug-type command to specify the type of RIPng messages to debug.
• When the debug level is set to 0, the log is turned off.
Example
-> ipv6 rip debug-level 50
Release History
Release 5.1.6; command was introduced.
Related Commands
MIB Objects
alaRipngDebug
alaRipngDebugLevel
parameter default
level 0
ipv6 rip debug-type Configures the type of RIPng messages to debug.