Filter
Top Products
Release 5.1.6.R02 User Guide Supplement June 2005 page 1-1
1 User Documentation
Addendum
This chapter includes information that should be added to or changed in the 5.1.6 release of the set of user
guides for the OmniSwitch 6600 Family, OmniSwitch 7700/7800, and OmniSwitch 8800.
OmniSwitch CLI Reference Guide
The following modifications should be made:
IPv6 Commands
Please refer to Chapter 2, “IPv6 Commands,” in this addendum for CLI commands pertaining to IPv6.
Chapter 40, “High Availability VLAN Commands”
On page 40-2 the following two bullet items should be added to the Usage Guidelines section for the
vlan port-mac ingress-port command:
• Note that removing the last ingress/egress port from an HA VLAN is not allowed. Deleting the VLAN
is required when there is only one ingress/egress port left in the VLAN.
• All HA VLAN related ports must first belong to the same default VLAN before they are configured as
ingress, egress, or inter-switch ports for the HA VLAN.
On page 40-3 the MIB Objects section for the vlan port-mac ingress-port command should be replaced
with the following:
vlanHAPortTable
vlanHAPortVlanId
vlanHAPortType
vlanHAPortIfIndex
On page 40-4 the following two bullet items should be added to the Usage Guidelines section for the
vlan port-mac egress-port command:
• Note that removing the last ingress/egress port from an HA VLAN is not allowed. Deleting the VLAN
is required when there is only one ingress/egress port left in the VLAN.
• All HA VLAN related ports must first belong to the same default VLAN before they are configured as
ingress, egress, or inter-switch ports for the HA VLAN.