Filter
Top Products
www.aleratec.com
6
Precautions
Before you start - continued
External Connection Warning:
In order to operate the duplicator solely as a standalone unit (no connection to the
computer), you have to make sure all of the USB connection(s) are off. If by any
chance, the USB connection(s) are on, please refer to “Setup Guide: Setup USB 2.0
device(s)”
Maintenance:
It is very important to operate and keep the duplicator in a dust free, clean
environment since dust is the number 1 killer for BD/DVD/CD recording devices.
Failure to do so may severely damage your duplicator.
Warning: Do not try to use the Air Duster to clean the duplicator while
the Reader/Writer Trays are open. In doing so, you may inadvertently
blow dust into the recording device and damage the recording device.
Warning: The Stand-Alone Tower Publisher SLS must never be cleaned
with a lens cleaning kit!
Proper Shutdown:
To avoid possible system failures, you need to shutdown the duplicator properly. To
shutdown the duplicator, you need to press the down arrow ( ) to “18. Shutdown”
and follow instructions on the screen to shutdown the duplicator properly. Turning
off your duplicator without performing this function will increase the risk of
damaging your duplicator.
Transportation
Please keep the original packing materials for future moving or shipping of the 1:15
Blu-ray/DVD/CD Tower Publisher SLS. Shipping the 1:15 Blu-ray/DVD/CD Tower
Publisher SLS without proper packaging will void the warranty.