Filter
Top Products
www.aleratec.com
41
Stand-Alone Tower Publisher SLS: Tutorials
Change the SETUP Settings
Most of the internal settings and information are stored inside the “Setup” menu. To
explore and modify these settings is simple. In the following example you will be
modifying the “Auto Start” setting.
Note: The default “Setup” is set for optimal performance. It is unnecessary to
change this setting if you are satisfied with your duplicator performance.
1. Use the UP or DOWN arrow button to navigate to the following screen.
2. Press ENT to enter “Setup” menu. You will see the following display:
3. Use the UP or DOWN arrow button to navigate to the following screen.
4. Press ENT to enter “Auto Start Setting” menu. You will see the following display:
5. Use the UP or DOWN arrow button to modify the setting to “Full”. Press ENT to
submit your selection. You will see the following display:
6. To modify more settings, go back to step 3. Otherwise, press ESC button to go
back to main menu.
Aleratec 1.00
14. Setup
COPY USB PRINT SOURCE
ESC ENT
Setup
1. Language
COPY USB PRINT SOURCE
ESC ENT
Setup
2. Auto Start
COPY USB PRINT SOURCE
ESC ENT
Auto Start
Auto
COPY USB PRINT SOURCE
ESC ENT
Setup
2. Auto Start
COPY USB PRINT SOURCE
ESC ENT
Aleratec 1.00
14. Setup
COPY USB PRINT SOURCE
ESC ENT