Filter
Top Products
www.aleratec.com
26
Stand-Alone Tower Publisher SLS: Tutorials
e. You now have the choice to load your Master Disc into a new (empty)
partition or overwrite one of the existing partitions (if any exist) by
inputting/modifying the name you desire; or you can simply choose “Auto
Generate” to have the system automatically generate a partition name for
you. Afterwards, simply press the UP or DOWN arrow button to nd your
desired selection and press ENT to submit your selection. You will see the
following (unless you have chosen “Auto Generate”, then please skip to
Step “h”):
f. Name the partition you are about to load into the Hard Drive. To enter
the name, use the UP or DOWN button to select the character and use
ESC or ENT button to move the cursor position and once you’ve nished
move the cursor to OK and press ENT. For example, if I want to name the
partition of your Master Disc as “FUN”, do the following:
Make sure the cursor is located at the rst position:
i. Press DOWN button consecutively until “F” is displayed.
ii. Press ENT button once to move the cursor to the next position.
iii. Press “DOWN” button consecutively until “U” is displayed.
iv. Press ENT button once to move the cursor to the next position.
v. Press “DOWN” button consecutively until “N” is displayed.
vi. Press ENT button once to move the cursor to the next position.
vii. With the partition name “FUN” displayed press ENT consecutively
until the cursor is moved to OK.
viii. Press ENT once to submit your name selection.
g. You will see the following conrmation screen:
EDIT PARTITION NAME
[ ] OK?
COPY USB PRINT SOURCE
ESC ENT
EDIT PARTITION NAME
[x ] OK?
COPY USB PRINT SOURCE
ESC ENT
Load Partition?
[FUN ] OK?
COPY USB PRINT SOURCE
ESC ENT