Filter
Top Products
www.aleratec.com
9
Overview
c. Click Install to complete the installation.
3. Connect the 1:15 to your PC with the USB cable.
4. Make sure the 1:15 is in USB mode. Press the “USB” fastkey on the control
panel on the front of the 1:15. If the screensaver is on you may have to press
the button twice.
5. You will see the LCD screen display the “USB Connection” menu. Below this
title you will see an “On” or “Off” listed. This is the current status of the USB
connection. To change the current status, use either the Up or Down arrow keys
to select the mode you want. Then, press the ENT key to conrm the selection.
You will be prompted to restart the system. For this guide make sure that the
USB mode is enabled.
Note: While in USB mode, the duplicator cannot access the hard drive
only the PC can.